Spring Deck Redo

NOTE: I DO NOT RECOMMEND THE DECK RESTORE PRODUCT WE USED.  AS TIME PASSED, IT DESTROYED OUR DECK.  PLEASE DO NOT PURCHASE!  

I was really hesitant to write this post... there are so many yards out there that are amazing and we still have so much work to do.  But with that being said, it's hard not to share since all of our efforts have been going to our home's exterior.  The past couple years, since moving, we haven't been able to devote any time to outdoor renovations, but this spring we have been putting all of our extra time (and house repair budgeting) to the outside of our home.

BEFORE:

First on our mile long list was renovating our back deck.  Above is a picture of how our deck previously looked.  (Sad, but true.)   The first thing we did this month was remove the old lattice, move the railroad ties, and pull up miscellaneous bushes and weeds (not to mention some very icky weed fabric and trash under the deck from the previous owners).

 Next Justus ripped out the old rotting steps and built these larger ones.  He centered it on the porch, which works so much better.  I can't tell you how much time we spend just sitting on the stairs of our back deck when the weather is nice. 

 Fortunately, the wood on the deck itself was still good, but the stain was wearing and there were splinters everywhere.  Justus found a product specifically for this type of problem.  It's called Deck Restore.  (PLEASE NOTE: I DO NOT RECOMMEND THIS PRODUCT.)  We bought it at Lowe's and it revives and protects wood surfaces.  You can purchase it in a variety of colors, but we chose Cape Cod Gray because we felt it matched our house best.

The paint covers up to 1/4" cracks and eliminates any splinters, but you have to spread it on thick.  Unfortunately we didn't realize until we brought the first couple gallons of paint home that one gallon only covers 50 sq. feet.  So although this is more cost efficient than replacing all of the wood, it was still costly... we had to purchase 7 gallons total.  Despite that, it was totally worth it.  Regular paint would not have hid imperfections.  

We only painted the stair treads with the Deck Restore to save some money.  Since the stairs are new, we didn't need to fill in any cracks or hide any imperfections.  I painted the sides of the stairs and the side of the porch where the lattice is with regular latex paint tinted to match the Deck Restore.

You can see in the picture above that we also put up new vinyl lattice. 

I visited our local nursery over the weekend and purchased two Annabelle hydrangea bushes to plant on either side of the stairs.  I love hydrangeas and I thought white blossoms would be so pretty here.

BEFORE:

 The only thing we did prior to this month was replace our back door.  This screen door was very outdated but I realized quickly when we went door shopping why it was still there.  Because the back of our house was originally a porch (before there was such a thing as indoor plumbing and kitchens), the door height is smaller than what you find now in stock.

AFTER:

Fortunately Justus is super handy and he was able to take the above door and customize it by taking it apart and rebuilding.  We also replaced the light fixture with this affordable beauty from Lowe's.   

 I took one of our rockers from the front porch, gave it a coat of fresh paint and put it on the back deck. 

 What you can't see in the picture above is that we also have a wooden patio table that needs refinishing,but we hope to get to that soon!  Once we do, I know we'll be eating many meals out here in the evenings. 

 We still have so many improvements to make outside, but it sure felt good to cross out this deck on our list!  

This week we rototilled our garden (can't wait to start planting) and moved some dirt in preparation for moving our driveway.  The gravel should be delivered Friday so we hope to have that completed this weekend!

What are you working on outside? I'd love to hear!

Ball Blue Canning Jars

 This weekend we made a quick visit to our local antique mall and while there I admired these old blue canning jars made by Ball.  Later that afternoon I was cleaning our dining room and suddenly realized how pretty the blue jars would look there.  I don't do this often, but when the girls woke up from their nap, we actually piled back in the car so that I could go back and buy these jars!

Since then I had fun doing a little reading on old Ball canning jars and learning how to "date" them.  This particular blue glass was discontinued around 1937 and was caused from the minerals used in the sand and the amount of oxygen used in their furnaces.  The jars I purchased have the writing "Perfect Mason" on them, which began appearing around the year 1913.  You can see that in the picture above the Ball logos are actually different.  From the little research I did, I believe the jar on the left would have been made somewhere between the years 1923-1933 whereas the jar on the right was made between 1910-1923. 

 On the bottom of the jar is a circle surrounding a number.  The circle is actually one way of determining whether or not you have an authentic jar - apparently it is an indicator of whether or not the jar was manufactured on an Owens machine, which was used before more modern machines. I've always wondered what the number on the bottom of the jars mean; however, apparently it was only used as a mould identifier. 

 I placed the three jars on top of the piano where I had a large empty place waiting for something... anything... to take residence!  (smile)

 They just seem to add a small touch of some needed blue in this corner of the dining room.

They perfectly match the dining room curtains, which is the reason I hightailed it back to the store... it's difficult to match this color.

I can't resist showing you another addition to our dining room.  We dyed some eggs with Jillian for the first time and she loved it.  (smile)

Fabric Flower Garland Tutorial

 Earlier this week I shared some spring time decorating in our living room and I promised to share the tutorial for the fabric flower garland I made. 

Are you interested?  If so, let's make some flowers!

SUPPLY LIST:

• 1 yard of quilting fabric with plenty left over (I wanted some variety, so I purchased 1/4 yard each of four different fabrics)
• 1/8 yard of heavier fabric, such as drop cloth or felt (to use as backing)
• Button cover tool set
• Hot glue gun
• Twine

Begin by tracing your flower outline onto the fabric.  However many petals your flower has is how many flower shapes you will need cut out.  For example, my flower had 6 petals, so I needed 6 flower shapes cut out total per flower.  For your outline, you could use a flower cookie cutter, an image printed out (like me) or even draw something freehand. 

 Cut out your flower shapes.  This part is a little time consuming, depending of course upon how many flowers you need.  I needed 6 flowers for my garland, so I had to cut out a total of 36 shapes.  

 Of course, I had my helpers along.  We spread a blanket out on the deck in the sunshine and the time passed very quickly!

In addition to the patterned fabric shapes, I also cut out one shape per flower for the backing.  I used drop cloth since I had some on hand, but felt would also work.  For the garland I made, I had a total of 42 flower shapes cut out (6 shapes for the back and 9 shapes of each pattern).

Now we're ready to assemble the flowers.

1.  Fold the shape in half.

2.  Fold it in half again.

3.  Do this for all 6 petals.

4.  Place one of the folded petals onto the backing so that the petals line up.

5.  Do this with each petal, overlapping as you go.

6. Finished and ready to sew!

I sewed a small circle around the center of my flower to secure the petals, but honestly you could probably do this with a hot glue gun if you don't own a sewing machine.

Iron the flower flat.

Now cut a small strip of drop cloth, or whatever backing material you are using, and sew it on the back.  This is what you will string the twine through.  You can tell I didn't care what the back of mine looked like (it was late)... I'm sure yours will look much nicer than this.  (smile)

Almost finished... it's time to cover the buttons.  Have you ever used a button cover tool kit?  I'm probably the only one who hadn't before this, but my mom recently picked up a kit for me, and wow, did I love it.  These buttons were a snap to make.

I not only glued the button onto the flower, but I also glued a small amount between the backing and quilting fabric.  This prevents it from flapping once hung.

Finished!  I created the garland by stringing two strands of twine through the back of each flower, but you could use anything.

I really had fun with this project.  I want to display my garland for a while, so I used colors that would coordinate well with the rest of the living room, but seasonal patterns would sure be fun! 

P.S.  I promised you would have extra fabric... now you have enough to make a super simple silhouette pillow!  (smile)
 
Happy Crafting!